No. 498 Shijin Road, Xukou Town, Wuzhong District, Suzhou China
TEL:
+86-0512-68131303
MP:
+86-18112568303
FAX:
+86-0512-68131303
EM:
eric@wys-fittings.com parts918@hotmail.com
WEB:
http://www.wys-fittings.com
NEWS
The hydraulic pipe fittings standard introduction
Time:2014-12-27 Source: Views:8437
Hydraulic fast jointisspecially designedforheavy loads,the female connectormaterialforsteel chrome plating,the male jointandthe female jointlock sleevearehardened,pressure resistantandgood fatigue resistance:the use of two seal,no leakage:withself-locking function.[1]
This connectionisneither aneed to use the tool,but also can realize therapidassembly and disassemblyof thejointline,he hasboth endsopen closedand twoopentwo structure.[1]
The ends ofopen close typequickconnector comprises a connector body,a one-way valve core,coat,steel ball,a spring and a sealingetc..The joint bodycavitywitha one-way valve,when the twoconnectorbody are separatedfrom,the check valveunder the action of the springunder the respectiveextended,andthe top pressurein the conicalhole of a joint body,so that thepathis closed,both sides ofthe oil in thepipeis closedcan not flowin a tube;the two push rodtouchingwhenthe twoconnector bodyconnectioncheck valveat the front end of thevalve core is forced toleave,the taper holeof the joint body,so that both sides ofthe pipeis communicated with theoil inside,twojoint bodywithsteel ball locking,when working,the coatin the spring under theball pressure in theU shaped groovejointbody,so that the adapter bodyconnection.
This connectionis convenient to disassemble,but the structure is more complex,the local resistanceloss is larger,suitable for oil,gasforthe pipe line system.
The ends ofopentype fast joint,andboth ends are openonly inthe jointbody inner cavity isnota one-way valveclosedthedifference,whentwo separatejoint body,nota closed passage.One end of the joint iscomposed of threepetal typehose jointis connected with a rubber tube,a joint corerubber hose jointdirectly into thefastjoint.2 notehydraulic fast jointeditor
A,according to usecan be divided into the form of:
Mainly used forair piping,pneumatic tool parts.Corresponding toits use,there is a rich and variedbodymaterial,dimensions and mountingshapes.
The use of attention to matters:
Be careful
Please do notfor any purpose other thanthefluid connector.
Please do notapplyforthe fluidfluidoutside.
Please don'tand thefluid connectoris connected with theothercompany.
When usingdo not exceed themaximum use of pressure.
Do not useoutside therange of using temperature,prevent to cause thesealing material wearor leakage.
Do nothit,artificialbending,stretching,preventdamage.
Do not use inmetalpowder ormixed withsand and dustand other places,to preventabnormal working orleakage.
Lsuch asattacheddebriscan causeabnormal working orleakage.
L[1]do not remove thequick connector.
Fast joint for2,oxygen,fuelgas:
Mainly used forgeneralfusepipe,with the flowcharacteristics,durability,corrosion resistance.The main material,size andshape ofthe rich diversity ofinstallation.