Spring Guard 弹簧护套

Spring Guard 弹簧护套

Technical parameters

弹簧护套时用耐磨钢丝制造，能保护软管免受磨损，延长软管的寿命。保护规格用弹簧内径表示。 用法：先测量软管外径，选择最接近内径尺寸的弹簧，剪下一段大约等于1/3软管长度的弹簧，把弹簧拉长至整改软管的长度， 从弹簧缠绕的相反方向吧弹簧旋入软管外层，然后加上接头扣压。、    Spring guards are mads of wear resistant wire and plated,they can protect hose from wear, abrasion and deep cuts,thus prolong the working life of hose lines.    Installation Cuide:Choose a spring guard with I.D.just larger than ten O.D.of hose, cuta piece about 1/3 the length of hose,then extend it longitudinally to reach the whole length of the hose.Tirn the spring guard opposite to the direction of wire-winding when  pushing onto the hose,then crimp the hose fittings finally. 型号PART NO. 内径I.D. 钢丝直径WIRE 长度LENGTH HT04-13 13 1.4 3000 HT04-15 15 1.4 3000 HT04-17 17 1.4 3000 HT04-18 18 1.5 3000 HT04-20 20 1.5 3000 HT04-22 22 1.5 3000 HT04-24 24 1.5 3000 HT04-25 25 1.5 3000 HT04-27 27 1.5 3000 HT04-30 30 2 3000 HT04-32 32 2 3000 HT04-34 34 2 3000 HT04-36 36 2.5 3000 HT04-38 38 2.5 3000 HT04-40 40 2.5 3000 HT04-42 42 2.5 3000 HT04-45 45 2.5 3000 HT04-46 46 2.5 3000 HT04-49 49 2.5 3000 HT04-51 51 3 2000 HT04-52 52 3 2000 HT04-54 54 3 2000 HT04-57 57 3 2000 HT04-70 70 3 2000 HT04-74 74 3 1500